TES 1-1211

DC/DC Converter TES 1 Series, 1 Watt • • • • • • I/O isolation 1500 VDC • • High accuracy of pin co-planarity • • Available in tape and reel package Unregulated device Single and dual output models Input voltage 5, 12 and 24 VDC High efficiency up to 80% Operating temperature range –40°C to +90°C Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020C With their small footprint these 1 Watt DC/DC converters are an ideal and economical solution for many applications where an isolated voltage is required. Typical applications are ground loop elimination, noise reduction, voltage isolation in digital interfaces and voltage conversion in distributed power systems. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. For automated SMD production lines the devices can be supplied in standard tape and reel package. 3-year product warranty Models Order Code Input Voltage Range TES 1-0510 TES 1-0511 TES 1-0519 TES 1-0512 TES 1-0513 TES 1-0521 TES 1-0522 TES 1-0523 TES 1-1211 TES 1-1219 TES 1-1212 TES 1-1213 TES 1-1221 TES 1-1222 TES 1-1223 TES 1-2411 TES 1-2419 TES 1-2412 TES 1-2413 TES 1-2421 TES 1-2422 TES 1-2423 www.tracopower.com 4.5 - 5.5 VDC (5 VDC nom.) 10.8 - 13.2 VDC (12 VDC nom.) 21.6 - 26.4 VDC (24 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 5 VDC 9 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 5 VDC 9 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 300 mA 200 mA 110 mA 84 mA 67 mA 100 mA 42 mA 33 mA 200 mA 110 mA 84 mA 67 mA 100 mA 42 mA 33 mA 200 mA 110 mA 84 mA 67 mA 100 mA 42 mA 33 mA September 23, 2022 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 100 mA 42 mA 33 mA –5 VDC –12 VDC –15 VDC 100 mA 42 mA 33 mA –5 VDC –12 VDC –15 VDC 100 mA 42 mA 33 mA typ. 73 % 78 % 78 % 78 % 79 % 74 % 78 % 78 % 76 % 78 % 79 % 80 % 74 % 78 % 79 % 78 % 77 % 77 % 79 % 73 % 78 % 78 % Page 1 / 4 TES 1 Series, 1 Watt Input Specifications Input Current - At no load 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: - At full load Surge Voltage Recommended Input Fuse Input Filter 30 mA typ. 15 mA typ. 8 mA typ. 260 mA max. 110 mA max. 55 mA max. 9 VDC max. (1 s max.) 18 VDC max. (1 s max.) 30 VDC max. (1 s max.) (The need of an external fuse has to be assessed in the final application.) Internal Capacitor Output Specifications Voltage Set Accuracy Regulation Ripple and Noise Capacitive Load Minimum Load - Input Variation (1% Vin step) - Load Variation - Voltage Balance (symmetrical load) - 20 MHz Bandwidth single output models: dual output models: See application note: dual output models: ±3% max. (at 60% load, 3.3 & 5 Vout models) ±3% max. (at 100% load, other output models) 1.5% max. 1.5% max. www.tracopower.com/overview/tes1 1% max. 120 mVp-p max. 33 µF max. 2 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) ±0.02 %/K max. 400 ms max. Limited 0.5 s max., Automatic recovery Temperature Coefficient Start-up Time Short Circuit Protection Safety Specifications Safety Standards - IT / Multimedia Equipment Designed for EN 62368-1 (no certification) General Specifications Relative Humidity Temperature Ranges Power Derating Cooling System Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Moisture Sensitivity (MSL) Washing Process Housing Material Base Material - Operating Temperature - Case Temperature - Storage Temperature - High Temperature - Input to Output, 60 s - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF 95% max. (non condensing) –40°C to +90°C +105°C max. –50°C to +125°C 3.3 %/K above 75°C Natural convection (20 LFM) 50 - 140 kHz (PFM) 100 kHz typ. (PFM) Functional Insulation 1'500 VDC 1'800 VDC 1'000 MΩ min. 40 pF typ. 100 pF max. 2'000'000 h (MIL-HDBK-217F, ground benign) Level 2 (J-STD-033C) Not allowed (vent-hole without membrane) Non-conductive Plastic (UL 94 V-0 rated) Non-conductive Plastic (UL 94 V-0 rated) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 23, 2022 Page 2 / 4 TES 1 Series, 1 Watt Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Phosphor Bronze (C5191) Copper (1 - 3 µm) Tin (7.5 µm min.), matte Plastic Case PCB Mount SMD (Surface-Mount Device) SMD8 (single output models) SMD10 (dual output models) Reflow Soldering (J-STD-020E) 245°C max. 1.7 g 2g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: No Exemptions Soldering Profile Weight - single output - dual output Environmental Compliance - REACH Declaration - RoHS Declaration Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tes1 Outline Dimensions 3.0 (0.12) 2 3.04 2.54 (0.12) (0.1) 4 5.08 (0.2) 13.7 11.0 ±0.2 1 0.15 (0.006) R0 . (R 0. 5 02 ) (0.06) Pinout Pin Single 1 –Vin (GND) 2 +Vin (Vcc) 4 –Vout 5 +Vout 8 NTC ° 0-4 5.5 (0.22) NTC: Pin to be isolated from circuitry (0.43 ±0.008) 8.0 (0.12) (0.31) 3.0 5 (0.01) 1.5 Ø1.0 (Ø 0.04) vent hole (for reflow soldering process) 8 0.25 7.0 ±0.5 (0.28 ±0.02) 6.7 0.3 (0.02) (0.01) 0.6 (0.26) Single Output Models Dimensions in mm (inch) Pin pitch tolerances: ±0.10 (±0.004) Other tolerances: ±0.25 (±0.01) (0.54) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 23, 2022 Page 3 / 4 TES 1 Series, 1 Watt 3.0 (0.12) 2 3.04 2.54 (0.12) 4 5 5.08 2.54 (0.2) (0.1) (0.1) 0.15 (0.006) .5 2) ° 0-4 5.5 (0.22) 11.0 ±0.2 1 (R 0. 0 (0.06) Pinout Pin Dual 1 –Vin (GND) 2 +Vin (Vcc) 4 Common 5 –Vout 7 +Vout 10 NTC NTC: Pin to be isolated from circuitry (0.43 ±0.008) 8.0 (0.12) (0.31) 3.0 7 R0 1.5 Ø1.0 (Ø 0.04) vent hole (for reflow soldering process) 10 (0.01) 0.25 7.0 ±0.5 (0.28 ±0.02) 6.7 0.3 (0.02) (0.01) 0.6 (0.26) Dual Output Models Dimensions in mm (inch) Pin pitch tolerances: ±0.10 (±0.004) Other tolerances: ±0.25 (±0.01) 16.24 (0.64) Recommended Solder Pad Layout 2.0 (0.08) 1.2 min. (0.05) (0.49) (0.05) 12.4 2.0 1.2 min. (0.49) 12.4 Dual Output Models (0.08) Single Output Models 2.54 5.08 2.54 5.08 2.54 (0.1) (0.2) (0.1) (0.2) (0.1) Dimensions in mm (inch) © Copyright 2022 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 23, 2022 Page 4 / 4